+39 0114117026 - VAT number: IT06195860017 - mail@astroflex.it info@astroflex.it

VIBRATIG

The VIBRATIG vibration absorbers are employed in order to eliminate the vibrations, transmitted by the compressor, to the general circuit pipes. They also reduce noise and compensate small thermal expansion.
The particular construction of the VIBRATIG also allows vertical installation.
They avoid any possibility of condensation water retention in the wavy area adjacent to the end of the pipe.
All the joints between the various components, including COPPER/STAINLESS STEEL, are made by TIG welding. Since there is no brazing, VIBRATIG can be brazed on the pipes without limiting overheating.

Fluid: suitable for all fluids of Group 1 and 2 in accordance with Art. 9, European Directive 97/23 / EC
Nominal Pressure: PN35 up to DN50:  NP25 from DN65 onward
Temperature: -100° C min to +250° C max

7577-000

(Group 2 fluids, CAT 1, according to Directive 97/23/EC)

Flexible: AISI 321 / 316L (EN 10028/7  1.4541/1.4404)

Hose ends: Cu-DHP (EN 12449 CW024A R360)

Braid: AISI 304 (EN 1.4301 10088/3)

7413-000

(Group 1 fluids, PED CAT 2, Notified Body TUVSUD, according to Directive 97/23/EC)

Flexible: AISI 321 / 316L (EN 10028/7  1.4541 / 1.4404)

Hose ends: Cu-DHP (EN 12449 CW024A R360)

Braid: AISI 304 (EN 1.4301 10088/3)

The exclusive distributor for Italy is SANITAL srl and this is hits official site!

 

DN= Diametro Nominale= Nominal Bore